A jammed, humming, or leaking disposal under the sink is one of the fastest repairs our technicians handle. Most visits are finished the same day, without needing a full replacement. A disposal leaking under the sink should be treated as an emergency — call now.
Garbage disposal problems are usually mechanical, meaning they're often quick to diagnose and fix. Here's what we see most.
Usually a jam in the flywheel that can often be cleared without new parts.
A worn seal or a cracked housing is typically the cause of leaks below the sink.
Could be a tripped reset button, a bad switch, or an electrical issue.
Often something stuck in the chamber, or worn grind components.
Can be a clog in the disposal itself or in the connected drain line.
Usually a sign the motor is straining and needs inspection.
Disposals are simple machines, so most issues can be found quickly with a methodical check.
We check the flywheel and reset switch first, since these solve most disposal problems.
Leaks and drainage issues are checked next if the unit powers on fine.
You'll know the cause and cost, including whether replacement makes more sense than repair.
We run water and test the disposal to confirm it's grinding and draining properly.
We service disposals from all the major brands installed in Somerset kitchens.
This usually means the flywheel is jammed by something stuck inside. It's often cleared quickly without needing a new unit.
It's safe to try pressing the reset button on the bottom of the unit. If it trips again quickly, that points to a deeper issue worth having checked.
Many disposal issues are inexpensive to repair. We'll tell you honestly if your unit is old enough that replacement makes more sense.
This is usually a worn internal seal that develops with age and use, and it's a straightforward repair.
Call now for a same-day appointment, or reach out online and we'll get right back to you.